[1]陆新征,张万开,柳国环.基于推覆分析的RC框架地震倒塌易损性预测[J].地震工程与工程振动,2012,(04):001-6.
 LU Xinzheng,ZHANG Wankai,LIU Guohuan.Prediction of seismic collapse vulnerability of RC frame based on pushover analysis method[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2012,(04):001-6.
点击复制

基于推覆分析的RC框架地震倒塌易损性预测
分享到:

《地震工程与工程振动》[ISSN:/CN:]

卷:
期数:
2012年04期
页码:
001-6
栏目:
出版日期:
2012-08-28

文章信息/Info

Title:
Prediction of seismic collapse vulnerability of RC frame based on pushover analysis method
作者:
陆新征 张万开 柳国环
清华大学 土木工程系, 土木工程安全与耐久教育部重点试验室, 北京 100084
Author(s):
LU Xinzheng ZHANG Wankai LIU Guohuan
Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Department of Civil Engineering, Tsinghua University, Beijing 100084, China
关键词:
静力推覆分析地震倒塌易损性IDA倒塌率位移安全储备
Keywords:
pushover analysisseismic collapse vulnerabilityIDAcollapse probabilitymargin ratio
分类号:
P315.9;TU375.4
摘要:
基于倒塌率的结构倒塌易损性分析是目前评价结构抗倒塌能力最合理的方法。但是,目前基于增量动力分析(IDA)的倒塌率分析方法,工作量和实施难度大,很难直接用于工程设计,因此有必要研究便于工程应用的新方法。本文基于18个典型多层RC框架结构的IDA倒塌率分析和静力推覆分析,发现RC框架在大震下的倒塌率及抗倒塌安全储备(CMR)与静力推覆得到的结构位移安全储备之间存在较好的相关关系。依据此关系,建议了保证大震倒塌率的推覆位移安全储备,并通过9个RC框架结构算例进行了验证。本文方法简单易行,可供规则多层RC框架结构抗倒塌设计参考。
Abstract:
The collapse-vulnerability analysis based on collapse probability is the most reasonable method to evaluate the collapse resistant capacity of structures. However, currently collapse probability analysis is mostly based on incremental dynamic analysis (IDA), which is difficult to be directly used for engineering design due to relatively heavy workload and complicated procedure. Therefore, it is necessary to develop a new method, which is convenient for engineering application. In this paper, 18 RC frames are analyzed respectively by using pushover analysis and IDA. Then, the correlation between the results of pushover and those of IDA are studied. The results show that there are fairly good correlated relations between the collapse margin ratio (CMR), the collapse probability under maximal considered earthquake (MCE) and the displacement margin ratio from pushover analysis. Based on these relations, the design displacement margin ratio of pushover analysis to meet the requirement of the collapse probability under MCE is recommended. Nine additional RC frames are used to validate the proposed displacement margin ratio, which shows this method is easy to use and can provide reference for engineering design of regular multistory RC frame.

参考文献/References:

[1] Vamvatsikos D, Cornell C A. Incremental dynamic analysis [J]. Earthquake Engineering and Structural Dynamic, 2002, 31(3):491-514.
[2] 陆新征,叶列平.基于IDA分析的结构抗地震倒塌能力研究[J].工程抗震与加固改造,2010,32(1):13-18. LU Xinzheng, YE Lieping. Study on the seismic collapse resistance of structural system[J]. Earthquake Resistant Engineering and Retrofitting, 2010, 32(1): 13-18.(in Chinese)
[3] 吕大刚,于晓辉,王光远.基于单地震动记录IDA方法的结构倒塌分析[J].地震工程与工程振动,2009,29(6):33-38. LU Dagang, YU Xiaohui,WANG Guangyuan. Structural collapse analysis based on singlerecord IDA method[J]. Journal of Earthquake Engineering and Engineering Vibration, 2009,29(6):33-38.(in Chinese)
[4] FEMA-P695. Quantification of Building Seismic Performance Factors[S].
[5] 陆新征,叶列平,缪志伟.建筑抗震弹塑性分析[M].北京:中国建筑工业出版社,2009:37-104,143-162,271-283. LU Xinzheng,YE Lieping, MIAO Zhiwei. Elasto-plastic analysis of buildings against earthquake[M].Beijing:China Building Industry Press,2009: 37-104,143-162,271-283.(in Chinese)
[6] FEMA-356 Prestandard and Commentary for the Seismic Rehabilitation of Buildings[S].
[7] 唐代远,陆新征,叶列平,等.柱轴压比对我国RC框架结构抗地震倒塌能力的影响[J].工程抗震与加固改造,2010,32(5):26-35. TANG Daiyuan, LU Xinzheng, YE Lieping, et al. Influence of axial compression ratio to the seismic collapse resistance of RC frame structures [J].Earthquake Resistant Engineering and Retrofitting, 2010, 32(5): 26-35.(in Chinese)
[8] 黄羽立,陆新征,叶列平,等.基于多点位移控制的推覆分析算法[J].工程力学,2011,28(2):18-23. HUANG Yuli, LU Xinzheng, YE Lieping, et al. A pushover analysis algorithm based on multiple point constraints[J]. Engineering Mechanics, 2011, 28(2): 18-23.(in Chinese)
[9] ATC-40 Seismic Evaluation and Retrofit of Concrete Building[S].
[10] GB50011-2010建筑抗震设计规范[S]. GB50011-2010 Code for Seismic Design of Buildings[S].(in Chinese)
[11] 施 炜,叶列平,陆新征,等.不同抗震设防RC框架结构抗倒塌能力的研究[J].工程力学,2011,28(3):41-48. SHI Wei, YE Lieping, LU Xinzheng, et al. Study on the collapse-resistant capacity of RC frames with different seismic fortification levels[J]. Engineering Mechanics, 2011, 28(3): 41-48.(in Chinese)
[12] Tang B X, Lu X Z, Ye L P, et al. Evaluation of collapse resistance of RC frame structures for Chinese schools in seismic design categories B and C[J].Earthquake Engineering and Engineering Vibration, 2011, 10(3): 369-377.

备注/Memo

备注/Memo:
收稿日期:2011-12-15;改回日期:2012-2-7。
作者简介:陆新征(1978-),男,副教授,主要从事防灾减灾和非线性计算.E-mail:luxz@tsinghua.edu.cn
更新日期/Last Update: 1900-01-01