[1]方明霁,李国强.基于多弹簧模型的钢框架结构三维弹塑性地震反应分析[J].地震工程与工程振动,2007,27(03):022-29.
 FANG Mingji,LI Guoqiang.3-D plastic dynamic analysis of steel frames based on multi-spring model[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2007,27(03):022-29.
点击复制

基于多弹簧模型的钢框架结构三维弹塑性地震反应分析
分享到:

《地震工程与工程振动》[ISSN:/CN:]

卷:
27
期数:
2007年03期
页码:
022-29
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:
3-D plastic dynamic analysis of steel frames based on multi-spring model
作者:
方明霁12 李国强2
1. 上海师范大学建筑工程学院, 上海 201418;
2. 同济大学土木工程学院, 上海 200092
Author(s):
FANG Mingji12 LI Guoqiang2
1. College of Architecture and Civil Engineering, Shanghai Normal University, Shanghai 201418, China;
2. College ofCivil Engineering, Tongji University, Shanghai 200092, China
关键词:
多弹簧模型塑性理论剪切变形刚度矩阵钢框架结构弹塑性
Keywords:
multi-spring modelplastic theoryshear deformationstiffness matrixsteel frameplastic
分类号:
P315.952
摘要:
文章提出了考虑剪切变形弹塑性刚度影响的多弹簧模型的空间梁柱单元,用于反复加载下钢构件的数值模拟。应用多轴应力状态下的塑性应力-应变关系理论,在单元模型中考虑了弹塑性区域剪切变形对单元的弹塑性刚度的影响,针对单元模型的塑性区长度和弹簧布置两个参数,文中给出了合理建议取值。数值模拟分析表明,所提出的单元模型能够很好地模拟钢构件的弹塑性性能。在此基础上,以多高层钢结构商业设计软件MTS为平台,进行三维钢框架结构弹塑性动力时程分析模块的开发。最后,文章对一纯钢框架结构足尺振动台试验进行数值模拟,模拟分析结果表明,本文所提出的多弹簧单元模型及开发的动力分析模块能够较好地模拟钢结构在地震作用下的弹塑性性能。
Abstract:
The paper presents the spacial beam element model,which considers the plastic stiff influence of plastic-region shear deformation and can be used for simulating the steel member under circular loading.The deformation is based on the strain-stress theory under multi-axis stress states.This paper focuses on the analysis of two important parameters:the layout of spring and the length of plastic region,then puts forward several suggestions.Compared with the test,the multi-spring beam element well simulates the plastic behavior of steel elements.Furthermore,the 3-D plastic dynamic analysis module for steel frame is developed by the authors based on multi-story steel structure design software MTS.Moreover,the authors carry out the numerical simulation in a full-scale steel frame dynamic test and the result proves that the multi-spring beam element and whole program can simulate the plastic behavior of steel frames under dynamic loading perfectly.

参考文献/References:

[1] Li,KN,Otani 5 and Aoyma H.Rein forced concrete columns under verying axial load and Bi-direction horizontal load reversals[C]//Proc.,Pacific Confercnce on Earthquake Eng.,Tokyo-Kyoto,Ⅷ:537-542.
[2] 陈以一,沈祖炎.反复变动轴力下钢柱的数值分析模型[J].上海:同济大学学报,1994,22(4):499-504.
[3] 方明霁,李国强,孙飞飞.基于多弹簧模型的空间梁柱单元(Ⅰ)——参数分析[J].计算力学学报(已录用).
[4] 李国强,方明霁,孙飞飞.基于多弹簧模型的空间梁柱单元(Ⅱ)——理论模型[J].计算力学学报(已录用).
[5] 刘卫国.钢构件恢复力特性研究[D].上海:同济大学,1990.
[6] 黄靖宇.箱形钢柱的空间恢复力模型研究[D].上海:同济大学,1991.
[7] 方明霁.三维支撑钢框架结构弹塑性地震反应实用分析方法研究[D].上海:同济大学,2005.
[8] 李国强,方明霁,陆 烨.钢结构建筑轻质砂加气混凝土墙体的抗震性能试验研究[J].地震工程与工程振动 2005,25(2):22-87.
[9] 孙飞飞.高层钢筋混凝土空间框架结构地震反应的仿真分析[D].上海:同济大学,1999.
[10] Chen Y.Inelastic behavior of steel frames considering varying combined stressin the memers(in Japanese)[D].Tokyo:the Univ.of Tokyo,1994.

备注/Memo

备注/Memo:
收稿日期:2006-10-9;改回日期:2007-2-10。
基金项目:上海市优秀青年教师基金项目
作者简介:方明霁(1977- ),女,讲师,博士,主要从事多高层建筑钢结构动力研究.
更新日期/Last Update: 1900-01-01