参考文献/References:
[1] Hakuno M, Shidawara M, Hara T. Dynamic destructive test of a cantilever beam, controlled by an analog-computer[J]. Transactions of the Japan Society of Civil Engineers, 1969, 171:1-9.
[2] Takanashi K, Udagawa K, Seki M, et al. Non-linear earthquake response analysis of structures by a computer actuator on-line system (part 1 details of the system)[J].Transactions of the Architectural Institute of Japan, 1975, 229:77-83.
[3] Dermitzakis S N, Mahin, S A. Development of substructuring techniques for on-line computer controlled seismic performance testing[R]. Earthquake Engineering Research Center, Berkeley, CA, 1985.
[4] Nakashima M, Kato H, Takaoka E. Development of real-time pseudo dynamic testing[J]. Earthquake Engineering & Structural Dynamics, 1992, 21(1):79-92.
[5] Mosqueda G, Stojadinovic B, Hanley J, et al. Hybrid seismic response simulation on a geographically distributed bridge model[J]. Journal of structural engineering, 2008, 134(4):535-543.
[6] Nakashima M. Development, potential, and limitations of real-time online (pseudo-dynamic) testing[J]. Philosophical Transactions of the Royal Society of London. Series A:Mathematical, Physical and Engineering Sciences, 2001, 359(1786):1851-1867.
[7] Andreas S, Mahin S A, Fenves G L. Advanced implementation of hybrid simulation[R]//PEER Report 2009/104, Pacific Earthquake Engineering Research Center, University of California, Berkeley.
[8] Forouzan B, Nakata N. An explicit quadratic alpha numerical integration algorithm for force-based hybrid simulation[C]//16th World Conference on Earthquake Engineering. Santiago, 2017,Paper No. 1121.
[9] Kolay C, Ricles J M. Real-time hybrid simulation of a reinforced concrete structure using flexibility-based fiber elements and advanced integration algorithms[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 2347.
[10] Whyte C A, Mackie K R, Abbiati G, et al. Selection of optimal time-scaling for thermomechanical hybrid simulation[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 1675.
[11] Stehman M, Erb R, Nakata N. Real-time hybrid simulation with mixed force and displacement control strategy for testing of base-isolation bearings[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 3289.
[12] Abbiati G, Whyte C A, Dertimanis V K,et al. Hybrid simulation of large-scale structures at eth zürich:the new 8-actuator multi-axial subassemblage testing (mast) setup[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 721.
[13] Ricles J, Sause R, Marullo T, et al. Natural hazards engineering research infrastructure at lehigh:experimental facility with large-scale real-time multi-directional hybrid simulation testing capabilities[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 2683.
[14] Miyamori Y, Moriwaki M, Saito T, et al. Development of hybrid simulation system with a general fem software and ui-simcor at low-temperature environment[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 2597.
[15] Fermandois G, Spencer B F. Framework development for multi-axial real-time hybrid simulation testing[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 2770.
[16] Moustafa M A, Mosalam K M. Online P-delta correction for multi-degree-of-freedom hybrid simulation testing[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 3965.
[17] You S, Schellenberg A. Test rehearsal methods for quasi static and real-time hybrid simulations[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 3288.
[18] Chen C, Xu W, Guo T, et al. Effect of actuator delay on uncertainty quantification for real-time hybrid simulation[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 3531.
[19] Richardson S, Chen C, Avramova N. Numerical and experimental evaluation of a model accuracy indicator for hybrid simulations involving model updating[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 3532.
[20] Li N, Spencer B F, Li Z X. Model-based mdof real-time hybrid simulation procedure considering time-delay effects[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 4666.
[21] Abbiati G, Sch bi R, Sudret B, et al. Structural reliability analysis using deterministic hybrid simulations and adaptive kriging metamodeling[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 595.
[22] Hashemi M J, Tsang H H, Rajeev P. Reliable collapse risk assessment through hybrid simulation[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 1476.
[23] Fujitani H, Mukai Y, Yoshida S, et al. Verification of seismic response reduction by real-time hybrid simulation of a mid-story isolation with a magnetorheological rotary inertia mass damper[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 1503.
[24] Zhang R, Phillips B M, Taniguchi S, et al. Performance validation of inter-story isolation through shake table real-time hybrid simulation[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 2117.
[25] Sarebanha A, Schellenberg A, Schoettler M, et al. Hybrid simulation of full scale seismic isolation bearings using the caltrans srmd test facility[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 3782.
[26] Wang Y L, Mosalam K M, Günay S,et al. Seismic response evaluation of zonal hanging curtain wall system using hybrid simulation[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 1308.
[27] Santacana F O, Dorka U E, Petti L. Hybrid simulation in combination with highly complex and non-linear numerical models for seismic protection of antique column structures[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 1976.
[28] Chae Y, Park M, Kim C Y, et al. Comparison of dynamic response of reinforced concrete bridge piers using slow and real-time hybrid simulations[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 2459.
[29] Gomez D, Dyke S J, Maghareh A. Hybrid simulation:empowering earthquake engineering experimentation[C]//16th World Conference on Earthquake Engineering. Santiago, 2017, Paper No. 1040.