[1]李宏男,孙彤.轨道式负刚度控制系统的优化设计[J].地震工程与工程振动,2018,(01):021-27.[doi:10.13197/j.eeev.2018.01.21.lihn.003]
 LI Hongnan,SUN Tong.Optimal design for rail-type negative stiffness control system[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2018,(01):021-27.[doi:10.13197/j.eeev.2018.01.21.lihn.003]
点击复制

轨道式负刚度控制系统的优化设计
分享到:

《地震工程与工程振动》[ISSN:/CN:]

卷:
期数:
2018年01期
页码:
021-27
栏目:
论文
出版日期:
2018-06-30

文章信息/Info

Title:
Optimal design for rail-type negative stiffness control system
作者:
李宏男12 孙彤1
1. 大连理工大学 建设工程学部, 辽宁 大连 116024;
2. 沈阳建筑大学 土木工程学院, 辽宁 沈阳 110168
Author(s):
LI Hongnan12 SUN Tong1
1. Dept. of Infrastructure Engineering, Dalian University of Technology, Dalian 116024, China;
2. Dept. of Civil Engineering, Shenyang Jianzhu University, Shenyang 110168, China
关键词:
负刚度控制系统阻尼比优化设计Benchmark模型
Keywords:
negative stiffnesscontrol systemdamping ratiooptimal designBenchmark model
分类号:
P315.962;TU352
DOI:
10.13197/j.eeev.2018.01.21.lihn.003
摘要:
提出了一种轨道式负刚度控制系统。该系统由轨道式负刚度装置和新型SMA阻尼器构成,能够在模拟结构屈服的同时控制位移响应。根据负刚度控制系统的性能特点,从控制效果角度提出了优化目标函数,建立了优化数学模型。该目标函数考虑了4个关键的结构控制指标,为了便于权衡不同指标,分别取其在受控工况和无控工况下数值之比,然后分别计算每个比值在Benchmark问题给出的7条地震激励下的平均值。考虑优化参数较少且主次之分明显,采用分层序列法进行优化。针对隔震的Benchmark楼房模型进行了轨道式负刚度控制系统的优化设计。优化结果兼顾了对基底剪力和基底位移的控制效果,同时对层间位移和楼层加速度也有较好的控制效果,实现了目标函数最小化。
Abstract:
A rail-type negative stiffness control system is developed. The control system consists of a rail-type negative stiffness device (NSD) and a novel SMA damper, so it can mimic yielding of the global system while limiting displacement response. Optimization objective function is put forward by considering control effect and mathematical model is established according to the characteristic of the negative stiffness control system. Four important structural control indices are considered in the proposed objective function. The ratio of the controlled indice over uncontrolled indice are used in order to weigh different indicators. Mean value of each ratio under the seven earthquake excitations given by the Benchmark problem is calculated. Considering there are only two parameters need to be optimized, and there is a clear distinction between the primary and the secondary, Hierarchical sequence method is employed. Optimum design of rail-type negative stiffness control system is performed for smart base isolated Benchmark building. Optimization result strike a balance between the control result of base shear and base displacement. Meanwhile, story drift and floor acceleration are under effective control, and minimization of the objective function is achieved.

参考文献/References:

[1] 韩建平, 吕西林, 李慧. 基于性能的地震工程研究的新进展及对结构非线性分析的要求[J]. 地震工程与工程振动, 2007, 27(4):15-23. HAN Janping, LV Xilin, LI Hui. State-of-the-art of performance-based earthquake engineering and need for structural nonlinear analysis[J]. Earthquake Engineering and Engineering Dynamics, 2007, 27(4):15-23.(in Chinese)
[2] Reinhorn A M, Viti S, Cimellaro G P. Retrofit of structures:Strength reduction with damping enhancement[C]//Proceedings of the 37th UJNR Panel Meeting on Wind and Seismic Effects, 2005:16-21.
[3] Spencer Jr B F, Nagarajaiah S. State of the art of structural control[J]. Journal of Structural Engineering, 2003, 129(7):845-856.
[4] Iemura H, Pradono M H. Advances in the development of pseudo-negative-stiffness dampers for seismic response control[J]. Structural Control and Health Monitoring, 2009, 16(7/8):784-799.
[5] Iemura H, Kouchiyama O, Toyooka A, et al. Development of the friction-based passive negative stiffness damper and its verification tests using shaking table[C]//Proc., 14th World Conf. on Earthquake Engineering,Beijing, 2008.
[6] Nagarajaiah S, Reinhorn A M, Constantinou M C, et al. True adaptive negative stiffness:a new structural modification approach for seismic protection[C]//Tokyo, 5th World Conference on Structural Control and Monitoring, 2010.
[7] Sarlis A A. Negative stiffness device for seismic protection of structures[J]. Journal of Structural Engineering, 2013, 139(7):1124-1133.
[8] 钱辉. 形状记忆合金阻尼器消能减震结构体系研究[D]. 大连:大连理工大学, 2008. QIAN Hui. Passive energy dissipation system with shape memory alloy damper for structural vibration vontrol[D]. Dalian:Dalian University of Technology,2008.(in Chinese)
[9] Pasala D T R, Sarlis A A, Nagarajaiah S, et al. Adaptive negative stiffness:new structural modification approach for seismic protection[J]. Journal of Structural Engineering, 2013, 139(1):1112-1123.
[10] Narasimhan S, Nagarajaiah S, Johnson E A, et al. Smart base-isolated benchmark building. Part I:problem definition[J]. Structural Control and Health Monitoring, 2006, 13(2/3):573-588.

相似文献/References:

[1]许国山,吴斌.等效力控制方法在拟动力试验中的应用[J].地震工程与工程振动,2010,(02):079.
 XU Guoshan,WU Bin.Application of equivalent force control method to pseudo-dynamic testing[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2010,(01):079.
[2]唐贞云,李振宝,纪金豹,等.地震模拟振动台控制系统的发展[J].地震工程与工程振动,2009,(06):162.
 TANG Zhenyun,LI Zhenbao,JI Jinbao,et al.Development in shaking table control system[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2009,(01):162.
[3]张也,薛松领,常军.基于负刚度的减振设备参数优化及其应用[J].地震工程与工程振动,2018,(02):201.[doi:10.13197/j.eeev.2018.02.201.zhangy.023]
 ZHANG Ye,XUE Songling,CHANG Jun.Parameter optimization and application of vibration damping device based on negative stiffness[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2018,(01):201.[doi:10.13197/j.eeev.2018.02.201.zhangy.023]

备注/Memo

备注/Memo:
收稿日期:2017-01-02;改回日期:2017-05-09。
基金项目:国家自然科学基金项目(51261120375);辽宁省高等学校基本科研项目(LJZ2017040)
作者简介:李宏男(1957-),男,特聘教授,博士,长江学者,主要从事结构振动控制研究.E-mail:hnli@dlut.edu.cn
更新日期/Last Update: 1900-01-01