[1]谭启迪,薄景山,常晁瑜,等.基于模拟退火算法的设计反应谱标定方法[J].地震工程与工程振动,2020,40(01):155-161.[doi:10.13197/j.eeev.2020.01.155.tanqd.015]
 TAN Qidi,BO Jingshan,CHANG Chaoyu,et al.Calibrating method of seismic design response spectrum based on simulated annealing algorithm[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2020,40(01):155-161.[doi:10.13197/j.eeev.2020.01.155.tanqd.015]
点击复制

基于模拟退火算法的设计反应谱标定方法
分享到:

《地震工程与工程振动》[ISSN:/CN:]

卷:
40
期数:
2020年01
页码:
155-161
栏目:
论文
出版日期:
2020-05-30

文章信息/Info

Title:
Calibrating method of seismic design response spectrum based on simulated annealing algorithm
作者:
谭启迪1 薄景山12 常晁瑜12 韩昕1 乔峰2
1. 防灾科技学院, 河北 三河 065201;
2. 中国地震局工程力学研究所, 中国地震局地震工程与工程振动重点实验室, 黑龙江 哈尔滨 150080
Author(s):
TAN Qidi1 BO Jingshan12 CHANG Chaoyu12 HAN Xin1 QIAO Feng2
1. Institute of Disaster Prevention, Sanhe 065201, China;
2. Key Laboratory of Earthquake Engineering and EngineeringVibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin 150080, China
关键词:
模拟退火算法反应谱标定方法设计反应谱
Keywords:
simulated annealingresponse spectrumcalibrating methodseismic design response spectrum
分类号:
P315.9
DOI:
10.13197/j.eeev.2020.01.155.tanqd.015
摘要:
反应谱的标定是抗震设计的基础工作之一,模拟退火算法是基于模拟固体退火过程而提出的多参数优化组合方法。本文提出将模拟退火算法应用于设计反应谱的标定,并概述了模拟退火算法的基本原理及特点,介绍了运用MATLAB基于模拟退火算法对反应谱进行标定的过程。检验了将模拟退火算法应用于场地相关谱标定的可行性和合理性,给出了将其应用于工程场地地震安全性评价中设计反应谱标定实例。通过检验和实例分析可以看出,基于模拟退火算法的反应谱标定方法所给出的设计反应谱谱形真实地反映了原地震反应谱的特征,较客观的反映了场地相关反应谱的峰值和周期特征。
Abstract:
Calibration of the response spectrum is one of the basic work of seismic design, and simulated annealing algorithm is a multi-parameter optimization combination method based on simulated solid annealing process. The application of simulated annealing algorithm is proposed in this paper to the calibration of design response spectrum, the basic principles and characteristics of simulated annealing algorithm are summarized,the process of calibrating the response spectrum based on simulated annealing algorithm using MATLAB is introduced. The feasibility and rationality of applying simulated annealing algorithm to site correlation spectrum calibration are tested. An example of designing response spectrum calibration in seismic safety evaluation of engineering site is given. Through inspection and case analysis, it can be seen that the design response spectrum of the response spectrum calibration method based on simulated annealing algorithm faithfully reflects the characteristics of the original seismic response spectrum, more objectively reflects the peak and periodic characteristics of the site-related response spectrum.

参考文献/References:

[1] Newmark N M,Hall W J.Seismic design criteria for nuclear reactor facilities[C]//Proceedings of the 4th WCEE.Santiago, Chile,USA,1969.
[2] 廖振鹏. 地震小区划-理论与实践[M]. 北京:地震出版社,1989. LIAO Zhenpeng. Earthquake zoning-theory and practice[M]. Beijing:Seismological Press, 1989.(in Chinese)
[3] 苏经宇, 谭健. 考虑模糊信息的设计反应谱标定方法[J]. 建筑科学, 1990,9(3):25-30. SU Jingyu, TAN Jian. Calibration method of design response spectrum considering fuzzy information[J]. Architecture Science, 1990,9(3):25-30.(in Chinese)
[4] 杨向东. 设计地震反应谱的双参数标定方法及其应用[J]. 地震研究, 1993,16(2):178-186. YANG Xiangdong. Two-parameter calibration method for designing seismic response spectrum and its application[J]. Journal of Seismological Research, 1993,16(2):178-186.(in Chinese)
[5] 王国新,陶夏新,姜海燕. 反应谱特征参数的提取及其变化规律研究[J]. 世界地震工程, 2001,17(2):73-78. WANG Guoxin, TAO Xiaxin, JIANG Haiyan. Extraction of characteristic parameters of response spectrum and its variation law[J]. World Earthquake Engineering, 2001, 17(2):73-78.(in Chinese)
[6] 夏江,陈清军. 基于遗传算法的设计反应谱标定方法[J]. 力学季刊, 2006,27(2):317-322. XIA Jiang, CHEN Qingjun. Calibration method of design response spectrum based on genetic algorithm[J]. Chinese Quarterly of Mechanics, 2006,27(2):317-322.(in Chinese)
[7] 刘红帅.基于小生境遗传算法的设计地震动反应谱标定方法[J].岩土工程学报,2009,31(6):975-979. LIU Hongshuai. Calibration method for design ground motion response spectrum based on niche genetic algorithm[J]. Chinese Journal of Geotechnical Engineering, 2009, 31(6):975-979.(in Chinese)
[8] 郭晓云,薄景山,巴文辉,等.最小二乘法分段拟合标定反应谱方法[J].世界地震工程,2012,28(3):29-33. GUO Xiaoyun, BO Jingshan, BA Wenhui, et al. Method of segmentation fitting calibration response spectrum by least squares method[J].World Earthquake Engineering,2012,28(3):29-33.(in Chinese)
[9] 梁旭,等.现代智能优化混合算法及其应用[M].2版.北京:电子工业出版社,2014:20-32. LIANG Xu, et al. Modern intelligent optimization hybrid algorithm and its application[M]. 2nd ed, Beijing:Publishing House of Electronics Industry, 2014:20-32.(in Chinese)
[10] 郁磊,史峰,王辉,等.MATLAB智能算法30个案例分析[M].2版.北京:北京航空航大学出版社,2015:178-187. YU Lei, SHI Feng, WANG Hui, et al. 30 case analysis of MATLAB intelligent algorithm[M]. 2nd ed.Beijing:Beijing Aviation University Press, 2015:178-187.(in Chinese)
[11] 刘浩,韩晶.MATLAB R2014a完全自学一本通[M].北京:电子工业出版社,2015:2-6. LIU Hao, HAN Jing. MATLAB R2014a completely self-study one pass[M]. Beijing:Publishing House of Electronics Industry, 2015:2-6.(in Chinese)
[12] 谢云.模拟退火算法综述[J].计算机应用研究,1998,14(5):7-9. XIE Yun.Overview of simulated annealing algorithm[J].Application Research of Computers,1998,14(5):7-9.(in Chinese)
[13] 卓金武.MATLAB在数学建模中的应用[M].2版.北京:北京航空航大学出版社,2014:107-121. ZHUO Jinwu. Application of MATLAB in mathematical modeling[M]. 2nd ed.Beijing:Beijing Aviation University Press, 2014:107-121.(in Chinese)

相似文献/References:

[1]张聪,佐藤忠信,吕令毅.地震动群延时不确定性对反应谱的影响研究[J].地震工程与工程振动,2012,32(02):054.
 ZHANG Cong,Tadanobu SATO,LV Lingyi.Study on influence of earthquake GDT uncertainty on response spectra[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2012,32(01):054.
[2]黄仕彪,张振亚,贺广零.人造地震动反应谱的非线性拟合[J].地震工程与工程振动,2012,32(03):023.
 HUANG Shibiao,ZHANG Zhenya,HE Guangling.Nonlinear fitness of artificial ground motion response spectrum[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2012,32(01):023.
[3]唐柏鉴,裴波,李鑫.悬挂式巨型钢框架住宅受力性能分析[J].地震工程与工程振动,2012,32(03):057.
 TANG Baijian,PEI Bo,LI Xin.Mechanical performance analysis of suspended mega-steel frame[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2012,32(01):057.
[4]徐国栋,史培军,周锡元.基于目标反应谱和包线的地震动合成[J].地震工程与工程振动,2010,30(01):001.
 XU Guodong,SHI Peijun,ZHOU Xiyuan.Artificial ground motion based on target response spectra and envelope[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2010,30(01):001.
[5]吕大刚,贾明明,李佳,等.钢框架结构直接基于位移抗震性能设计的非迭代法[J].地震工程与工程振动,2010,30(01):029.
 Lü Dagang,JIA Mingming,LI Jia,et al.Direct displacement-based seismic performance design without iteration for steel frame structures[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2010,30(01):029.
[6]陈勇,赵凤新,胡聿贤,等.不同阻尼比反应谱的转换关系[J].地震工程与工程振动,2010,30(04):017.
 CHEN Yong,ZHAO Fengxin,HU Yuxian,et al.Transfer relationship among response spectra with different damping ratios[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2010,30(01):017.
[7]党育,霍凯成.多层隔震结构的竖向地震作用研究[J].地震工程与工程振动,2010,30(04):139.
 DANG Yu,HUO Kaicheng.Vertical earthquake responses of multi-storey isolated buildings[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2010,30(01):139.
[8]李海山,丁阳.基于相位余弦分区的人造地震动反应谱拟合[J].地震工程与工程振动,2011,31(01):019.
 LI Haishan,DING Yang.Artificial ground motion compatible with design response spectrum based on phase cosine partitions method[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2011,31(01):019.
[9]李平,薄景山,孙有为,等.场地类型对反应谱平台值的影响[J].地震工程与工程振动,2011,31(01):025.
 LI Ping,BO Jingshan,SUN Youwei,et al.Effects of site types on flat section values of response spectra[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2011,31(01):025.
[10]梁建文,李帆,刘中宪.地铁隧道群对地震动的放大作用[J].地震工程与工程振动,2011,31(02):031.
 LIANG Jianwen,LI Fan,LIU Zhongxian.Amplification of ground motion by metro tunnel group[J].EARTHQUAKE ENGINEERING AND ENGINEERING DYNAMICS,2011,31(01):031.

备注/Memo

备注/Memo:
收稿日期:2019-04-05;改回日期:2019-07-20。
基金项目:国家自然科学基金项目(U1939209,51508096,51808118)
作者简介:谭启迪(1990-),女,硕士研究生,主要从事工程地震研究.E-mail:tanqiditd@163.com
通讯作者:薄景山(1957-),男,教授,博士,主要从事岩土工程抗震研究.E-mail:bojingshan@163.com
更新日期/Last Update: 1900-01-01